1st Stage: | PP Filter Cartridge | 2nd Stage: | UDF Filter Cartridge |
---|---|---|---|
3rd Stage: | CTO Filter Cartridge | 4th Stage: | RO Membrane |
5th Stage: | Post Carbon Inline Filter Cartridge | ||
Highlight: | ro system water filter,ro water purifier filters |
PRODUCT DETAILS
Stage | Description | Component Item No. | Replace time | Function |
1st | 5um pp Spun Fiber | PP-10” | 2-3months | Remove the particles,dust,mud etc. |
2nd | Granular Carbon Filter | GAC-10”(UDF-10) | 4-6month | Remove the chlorine,organics,odor,smell turbidity etc. |
3rd | Block Carbon Filter | CTO-10” | 4-6months | Remove the chlorine,odor,smell and suspending particles. |
4th | RO membrane | CSM or FCS or FILMTEC | 1-2yesrs | Remove the bacteria,heavy metal,salt,bad mineral substance and other dissolved matter and chemical drug in the running water |
5th | Post inline Carbon Filter | T-33 | 1year | Adjust the taste. |
6th | UFmembrane | UF-10 | 1-2years | Concentrates particles,collolds and separates them from raw water. |
7 TH | Uv light | 6W | 1-2years | Kill bacteria viruses,mocro-organisms in water |
Installation Note
1. Do not install under sunlight;
2. The product working temperature 5 to 45 degrees;
3. The product can not filter hot water, please do not connect to water heater.
4. Before use it, installation of the product should be fixed to prevent product
turn down;
5. If the tap water pressue is higher than 0.4Mpa, please install the pressue
limiting valve before the product;
6. Do not arbitrarily remove the parts on the product, to prevent leakage and damage
to the machine;
7. PE pipe and fittings should installed in place;
8. Water tee, no seals should be wrapped with raw materials, there is a ring of raw
materials can not be wrapped around the band;
9. After the installation is completed, you should turn on the water and gooseneck
faucet, after 5 minutes, close gooseneck faucet , and check there leaks;
10. Pure water end and wastewater end can not be inversely connected.
When the source water enters the system it goes through stages one, two, and three, collectively known as the pre-filters. The job of the pre-filters is to remove large contaminants and protect the RO membrane from chemicals like chlorine and chloramines.
After the water has passed through the pre-filters, it is forced through the NSF certified reverse osmosis (RO) membrane, the same technology used to produce bottled water. This semi-permeable membrane features tiny 0.0001 micron sized holes, equivalent to just 0.000000004 of an inch. This allows it to effectively remove a long list of water contaminants only possible with reverse osmosis.
The fifth and final stage of filtration utilizes a finer GAC filter known as the post carbon filter. This provides a final polishing before the purified water is delivered to the faucet.
The end result is bottled quality water. In addition to the cost savings and health benefits, widespread use of in home filtration systems would reduce the impact of plastic bottles on the environment tremendously. With all of the benefits, it only makes sense to go RO!
Product Description
As the only top reverse osmosis system on the market to earn the Water Quality Association's Gold Seal Certification, unequaled in quality, safety, and durability.
The system incorporates polypropylene sediment (PP), granular activated carbon (GAC), carbon block (CTO), and reverse osmosis (RO) filtration technologies to provide crisp tasting, bottled-quality water.
With the system itself measuring 17.5 x 14.5 x 5.25 inches and the tank measuring 16 x 11 inches, the entire unit fits nicely in most under-sink cabinets.
Included with the system is a lead-free solid brass body faucet with a high quality brushed nickel finish. The faucet is typically mounted on the counter as the main output source for the RO water, but output lines can also be connected to your refrigerator output, ice maker, and coffee maker.
The installation process is streamlined and DIY for most users, with written, video, and tech support assistance. Replacement filters are standard sized and sold at factory direct pricing
FUTURE
Provides an easy way to visually inspect the sediment filter and view the contaminants being removed from your water. With the transparent housing you will know it is time for a filter change before a problem occurs.
The advantage of having both a GAC & CTO filter is that the loose carbon is better at trapping large contaminants, leaving only smaller ones to the CTO carbon block filter. This allows the CTO filter and RO membrane to function at their maximum efficiency and last longer.
Push to connect fittings and color coordinated tubings simplify the installation process, and our DIY installation video and customer support are both readily available if needed
Featuring a smooth quarter-turn handle and durable ceramic valve, the included brushed nickel faucet is an elegant addition to any kitchen. For more information, please call customer care or check the official website.